Products
Specifications 1)
|
Model |
PL2240 |
PL2241 |
PL2241A |
PL2241B |
PL2241C |
|
Pulse energy, mJ |
|||||
|
At 1064 nm |
4 |
30 |
50 |
80 |
100 |
|
At 532 nm 2) |
1.8 |
15 |
25 |
40 |
50 |
|
At 355 nm 3) |
1.2 |
10 |
15 |
24 |
30 |
|
At 266 nm 4) |
0.7 |
3 |
7 |
10 |
12 |
|
Pulse energy stability (Std. Dev), %5) |
|||||
| At 1064 nm |
<1.5 |
||||
| At 532 nm |
<3 |
||||
| At 355 nm |
<5 |
||||
| At 266 nm |
<7 |
||||
| Pulse duration (FWHM), ps 6) |
<30 |
||||
| Pulse duration stability, ±ps 7) |
1.0 |
||||
| Repetition rate Hz 8) |
250 |
50 or 10 |
50, 30 or 10 |
20 or 10 |
10 |
| Polarization |
linear, vertical, >100:1 |
||||
| Post-pulse contrast |
>200:1 |
||||
| Triggering mode |
Internal/External |
||||
| Typical SYNC OUT pulse jitter, ns 9) |
<0.25 |
||||
| Typical SYNC OUT pulse delay, ns 10) |
400 |
||||
| Beam divergence, mrad 11) |
<0.8 |
<0.5 |
<0.5 |
<0.5 |
<0.5 |
| Beam pointing stability, μrad 12) |
<100 |
||||
| Typical beam diameter, mm 13) |
~4 |
~6 |
~8 | ~10 | ~12 |
|
Typical Warm-up time, min |
30 |
||||
Physical characteristics
| Model |
PL2240 |
PL2241 |
PL2241A |
PL2241B |
PL2241C |
| Laser head size (W x L x H), mm |
446x1220x260 |
||||
| Electric cabinet size (W x H x L), mm |
550x860x600 |
550x550x600 |
550x550x600 |
550x550x600 |
550x550x600 |
Operating requirements
| Model |
PL2240 |
PL2241 |
PL2241A |
PL2241B |
PL2241C |
| Water consumption (max 20° C), l/min |
<8 |
||||
| Room temperature, °C |
18-30 |
||||
| Relative humidity (non-condensing), % |
20-80 |
||||
| Mains requirements14) |
Three phase, 208 or 380 VAC, 20 A, 50 or 60 Hz |
||||
| Power, kVa |
<2.5 |
<3 |
<3 |
<3 |
<3 |
1) All specifications are subject to change without notice. The parameters marked typical are not specifications. They are indications of typical performance and will vary with each unit we manufacture. Unless stated otherwise all specifications are measured at 1064 nm.
2) For PL224x-SH option. Outputs are not simultaneous. Please inquiry for pulse energies at other wavelengths.
3) For PL224x-TH option. Outputs are not simultaneous. Please inquiry for pulse energies at other wavelengths.
4) For PL224x-FH option. Outputs are not simultaneous. Please inquiry for pulse energies at other wavelengths.
5) Averaged from 300 pulses.
6) Optional <25 ps duration.
7) Measured over 1 hour period when ambient temperature variation is less than ±1 °C.
8) Should be specified while ordering. Inquiry for other pulse repetition rates.
9) Delay is negative, SYNC OUT pulse emerge earlier than optical pulse.
10) In respect to optical pulse. <100 ps jitter is provided with PRETRIG option.
11) Full angle measured at the 1/e2 point @ 1064 nm.
12) RMS value measured from 300 shots.
13) Beam diameter is measured @ 1064 nm at the 1/e2 point.
14) Single phase 208–240 VAC mains for 10 Hz versions are available.