Send request

loading

Precision resistive heater kit TEC and TK10 series ovens

With combination of temperature controller, TK10 series ovens are designed specifically for tuning and conditioning the periodically poled bulk devices (PPSLT, PPLN & PP-MgO:LN) and other nonlinear crystals. The oven is designed to hold the crystal with dimensions of 30×16×1 mm. Custom made oven is also available. The crystal heater provides temperature stabilization for crystals with an accuracy of 0.1°C. Crystal temperature can be changed from 50°C to 200 °C.

Features

  • Crystal’s temperature stabilization
  • Fast temperature control using active cooling
  • External temperature kept low by insulation – no need for gloves
  • No alignment is required when crystal is removed and replaced
  • 4 screws to remove to exchange crystals
  • Crystals can be removed without removing the oven from the experiment
  • LabVIEW based software included

Applications

  • Fast temperature tuning of generated wavelengths in periodically oriented and noncritical phase-matching nonlinear crystals
  • Temperature tuning of Bragg grating wavelengths
  • Thermostat of tuning temperature

With combination of temperature controller, TK10 series ovens are designed specifically for tuning and conditioning the periodically poled bulk devices (PPSLT, PPLN & PP-MgO:LN) and other nonlinear crystals. The oven is designed to hold the crystal with dimensions of 30×16×1 mm. Custom made oven is also available. The crystal heater provides temperature stabilization for crystals with an accuracy of 0.1°C.  Crystal temperature can be changed from 50°C to 200 °C.

TK10 TK11 TK12
Resolution 0.1°C
Long term stability ±0.1°C
Basic accuracy ±0.5°C
Temperature sensor type PT1000
General specifications
controllability manual or via RS232 port
mains 90-264 VAC; 50/60 Hz
max power consumption 45 W
TEC controller dimensions (HxWxD) 67x155x160 mm
weight 1.5 kg
operating temperature -15°C to +35°C
storage temperature -40°C to +70°C
connectors 15-pin D-sub receptacle or 9-pin D-sub plug
Temperature control range 50-200 °C 60-200 °C 70-200 °C
Cooling type Water Air Heatsink
Heating time 130 s (50 -190°C) 120 s (60 -190°C) 110 s (70 -190°C)
Cooling time (190 °C -50/60 °C) 305 s 290 s 290 s
Cooling temperature change velocity* 1.1-0.25°C/s 1.0-0.1°C/s 1 -0.1°C/s
Heating temperature change velocity* 1.5-0.7°C/s 1.5-0.7°C/s 1.5-0.7°C/s
Set heater temperature 50 °C 60 °C 70 °C
Dimensions (HxWxD) 85 x 71 x 65 mm 95 x 71 x 65 mm 91 x 90.5 x 56 mm

*Depends on temperature

Specifications are subject to changes without advance notice

Precision Resistive Heater kit TEC and TK10 series ovens
Heating-cooling diagrams of TK10
Precision Resistive Heater kit TEC and TK10 series ovens
Heating-cooling diagrams of TK11
Precision Resistive Heater kit TEC and TK10 series ovens
Heating-cooling diagrams of TK12